 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LS01 Series Level Sensors with Magnetic Floats MEDER electronic DESCRIPTION Standard liquid level sensor. The sensor has to be mounted vertically for best results. Two versions are available: PP (Polypropylene) for water applications and dilute acids PA (Polyamide) for use in oil, gasoline (petrol) and brake fluid The standard termination is a PVC single wire with a cross section of 0.25 mm2 and a length of 500 mm. The cable can be modified on request. APPLICATIONS * Liquid container monitoring in household appliances, automotive applications, test and measurement, and control technology. FEATURES * High power switches available * Other cables, connectors and colors available * Form A (normally open) and Form B (normallyclosed) types are available * IP 68 (only to screw thread) All dimensions in mm [inch] DIMENSIONS SWITCHING STATUS SW12 M8 Form A Open Form B Closed O-ring marking float YM/P 4.50 [0.177] [1.673] 10 [0.394] Closed Open Lock washer o6.5 [o0.256] o240.3 [0.9450.012] www.meder.com 292 [0.748] 25.0 [0.984] 19 32.50 [1.280] 42.50 50010 [19.6850.39] 51 [0.1960.04] MEDER electronic LS01 Series Level Sensors with Magnetic Floats ORDER INFORMATION Part Number Example LS01 - 1A66 - PA - 500 1A is the contact form 66 is the switch model PA is the material 500 is the cable length (mm) W is the termination W Series LS01 Options Contact Form XX 1 Form A 1 Form B Switch Model XX 66, 84 Material XX PA, PP Cable Length (mm) XXX 500 * Termination X W * Other cable lengths available. Standard graduation of length 0.5 m. For other wire and termination details please contact factory. TERMINATION W The cable cut length includes: 5 mm of wire stripped and tinned MATERIALS PA Version Stem, nut Float Seal PP Version Stem, nut Float Seal Polypropylene white Polypropylene white Nitrile rubber Polyamide black Polyamide white with marking Alternative NBR Nitrile rubber www.meder.com 293 LS01 Series Level Sensors with Magnetic Floats MEDER electronic CONTACT DATA All Data at 20 C Contact Ratings Switching Power Switching Voltage Switching Current Carry Current Static Contact Resistance Dynamic Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operation Time incl. Bounce Release Time Capacitance Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10C/ minute max. allowable 10C/ minute max. allowable 5 sec. dwell -20 -20 50 20 90 100 260 -20 -20 50 20 90 100 260 g g o Switch Model Contact Form Conditions Any DC combination of V & A not to exceed their individual max.`s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10mA Measured w/ 0.5 V & 50 mA , 1.5 ms after closure 100 volts applied Voltage applied for 60 sec. min. Measured w/ 50 % overdrive Measured w/ no coil suppression at 10 kHz across contact Switch 66 Form A Switch 84 Form A / B Min. Typ. Max. Min. Typ. Max. Units 10 200 0.5 1.25 150 200 1010* 225 * 10 400 0.5 1.0 150 200 1011 700 W V A A m m VDC 0.5 0.1 0.2 0.7 0.5 0.1 ms ms pF C C C o o Please note: The indicated electrical data are maximum values and can vary downwards when using a more sensitive switch. * Insulation resistance of 1012 and breakdown voltage of 480 VDC is available. These ranges refer to the uncut / unmodified Reed Switches described in our Reed Switch section. Consult factory if more detail is required. www.meder.com 294 |
Price & Availability of LS01-1B84-PP-500W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |